我们专注于工业产品与应用开发，以及设备从安装、调试到运维的全流程支持。We focus on industrial products and application development, with end-to-end equipment support from installation and commissioning to operation and maintenance.
以可靠交付和现场执行，帮助客户提升效率、质量与安全，让每一次工业部署更高效、更可靠。Through reliable delivery and on-site execution, we help customers improve efficiency, quality and safety—making every industrial deployment more efficient and dependable.
从应用工况出发，提供真空与高温检测、工业传感及关键部件的选型与供货。结合光路、材料和安装条件，协助开展样品测试与应用验证，并跟进部件适配与交付，把合适的技术落实到设备中。Selection and supply support for vacuum and high-temperature detection, industrial sensing, and critical components. We review optical paths, materials, and mounting to support application validation.
查看更多Read more
我们在越南与印度有本地团队，为中国设备企业提供本地安装、调试及交付支持。以设备调试为核心，衔接机械电气安装、故障排查与驻厂运维，按项目范围组织现场实施。Local installation, commissioning, and delivery support in Vietnam and India. With commissioning at the core, we coordinate installation, troubleshooting, and on-site maintenance to the agreed scope.
查看更多Read more
真空与高温工况下，反射器的材料、结构和安装方式都需要与检测要求匹配。围绕反射式光路，确认距离、角度及可用空间，再结合真空度、温度和清洗条件选择方案。通过样品测试与信号验证，评估玻璃反射器在具体设备中的适用性。明确选型依据与适用范围。Reflectors for vacuum and high-temperature use need the right material, geometry, and mounting. Start with the optical distance, angle, and available space, then assess vacuum, temperature, and cleaning conditions. Sample testing and signal checks help evaluate suitability for the specific equipment.
了解详情Read the story
晶圆搬运的接触部件，需要兼顾低颗粒、低析气、耐磨和表面保护。围绕触垫与支撑部件，先确认尺寸、接触方式和使用环境，再比较材料及加工方案。结合样件验证与使用反馈，评估接触痕迹、运行稳定性和更换周期。为设备选型和后续维护提供参考。Wafer-handling parts must balance particle control, low outgassing, wear resistance, and surface protection. Check pad dimensions, contact geometry, and operating conditions before comparing materials. Samples and usage feedback help assess contact marks, stability, and replacement intervals.
了解详情Read the story
设备运抵海外工厂后，还需要完成调试、试运行和现场交接。围绕越南与印度项目，按设备类型、计划和现场条件配置支持，提前明确厂家与当地团队的分工。通过异常记录、问题升级和运行检查，衔接后续的培训与驻厂运维。让项目各阶段的现场配合更清晰。Equipment arriving overseas still needs commissioning, trial operation, and handover. For Vietnam and India projects, plan support around the equipment, schedule, and site, with clear roles for the manufacturer and local team. Issue logs and operating checks connect this work to training and on-site support.
了解详情Read the story
面向真空、高温与晶圆搬运工况，围绕光学检测、接触材料和关键部件开展选型，结合设备结构与清洗条件，安排适用性验证。Optical detection, contact materials, and critical parts for vacuum, high-temperature, and wafer-handling equipment, with application validation support.
围绕汽车零部件的装配、检测与产线改造，提供传感选型、部件适配和设备调试支持，配合生产现场的实施与交接。Sensing, component selection, and commissioning for automotive assembly, inspection, and line upgrades, with support for site implementation.
面向点胶、装配与测试设备，提供检测选型、功能调试和异常排查支持，并根据生产阶段安排驻厂维护与操作培训。Detection, commissioning, and troubleshooting for dispensing, assembly, and test equipment, plus on-site maintenance and operator training.
围绕电池及新能源制造设备，支持传感检测、关键部件选型与安装调试，结合项目阶段，明确设备厂家与现场团队的配合范围。Sensing, critical components, and commissioning for battery and new-energy equipment, with clear coordination across each project stage.
面向加工、包装与输送设备，围绕位置检测、部件适配和运行维护提供支持，结合生产环境，确认材料适用性与维护需求。Detection, component selection, and maintenance for processing, packaging, and conveying equipment, matched to the operating environment.
围绕制药、医疗器械制造与包装设备，讨论检测应用、部件选型和设备支持，并按客户要求确认清洁条件、资料与验证范围。Detection, component selection, and equipment support for pharma and medical-device production, with cleaning and validation requirements agreed.
善用有限资源，开发无限资源Use less, create more
告诉我们你的应用条件、部件需求或现场任务， 一起找到合适的解决办法。Tell us about your application or on-site challenge. Let’s find the right way forward.
真空检测、工业传感与关键部件应用Vacuum sensing, industrial inspection and key components
提交技术需求Submit a technical inquiry
让关键状态更清晰，让精密测量更可靠。服务于精密设备中的位置、尺寸、温度、厚度及其他关键参数的测量与监测。Make critical conditions clearer and precision measurement more reliable. Applied to the measurement and monitoring of position, dimensions, temperature, thickness and other key parameters in precision equipment.
查看详情View details
面向复杂质量要求，实现稳定、准确的检测与判断。应用于产品外观、表面缺陷、装配状态、位置特征及复杂目标的检测与识别。For complex quality requirements, enable stable and accurate inspection and judgment. Applied to product appearance, surface defects, assembly status, positional features and complex-object inspection and recognition.
查看详情View details
持续掌握工艺过程与设备状态，及时识别关键变化与异常。应用于工艺过程监测、运行状态判断、异常识别及关键过程节点的检测与分析。Maintain visibility into process and equipment conditions and identify key changes and abnormalities in time. Applied to process monitoring, operating-condition assessment, anomaly identification and analysis of critical process stages.
查看详情View details
应用于半导体设备的真空传输腔（TM/VTM）晶圆搬运位置检测，可为自动晶圆对中（AWC）提供晶圆边缘检测信号。Used in wafer-transfer paths inside semiconductor transfer chambers (TM/VTM), providing wafer-edge detection signals for presence checks and automatic wafer centering (AWC).
了解详情Read more
用于饮料、乳制品等容器铝箔热封后的在线质量筛查。Used for inline seal-quality screening after foil heat sealing on dairy beverage and similar containers.
了解详情Read more
用于晶圆搬运机械手末端（end-effector / fork）的晶圆支撑位置。Used at wafer support points on a robot end-effector or fork.
了解详情Read more
提供现场照片、工况参数与问题表现，我们为你提供部件选型、样件验证和安装适配支持。Share site photos, operating conditions and the issue you see. Get support with component selection, sample validation and installation fit.
告诉我们你的应用条件、部件需求或现场任务， 一起找到合适的解决办法。Tell us about your application or on-site challenge. Let’s find the right way forward.
TECONCE · TECHNOLOGY AREA
围绕位置、尺寸、距离、厚度及特殊环境检测，把测量任务与工况、安装结构和验证条件一起考虑。For position, dimension, distance, thickness and demanding-environment sensing, measurement is considered together with operating conditions, mounting and validation.
针对真空、高温、清洗介质或狭小空间，设计合适的光学与传感结构。Configure optical and sensing structures for vacuum, heat, cleaning media or confined spaces.
结合目标特征、测量范围、重复精度和节拍选择传感方式。Select the sensing method against target features, range, repeatability and cycle time.
通过样品、安装条件和实际工况测试，确认信号裕量与适用边界。Validate signal margin and application limits with samples, mounting conditions and real operating tests.
TECONCE · TECHNOLOGY AREA
围绕外观、缺陷、装配状态、识别与定位，把成像条件、算法和产线节拍整合为可验证的检测方案。For appearance, defects, assembly status, identification and positioning, imaging, algorithms and line cycle time are integrated into a verifiable inspection solution.
针对表面、边缘、异物、缺失和装配异常建立稳定成像条件。Create stable imaging conditions for surfaces, edges, foreign material, missing parts and assembly anomalies.
覆盖条码、字符、目标识别以及机器人或机构定位配合。Cover code/character reading, object recognition and positioning for robots or mechanisms.
在可见光难以判断时，引入红外、热成像或其他适合的成像方式。Use infrared, thermal or other suitable imaging where visible-light inspection is insufficient.
TECONCE · TECHNOLOGY AREA
持续采集关键工艺参数和设备状态，让异常更早被发现，并为维护、质量和工艺优化提供依据。Continuously capture key process parameters and equipment conditions so abnormalities are identified earlier and maintenance, quality and process improvement have better evidence.
对温度、压力、流量等关键参数进行稳定测量与趋势观察。Measure and trend key variables such as temperature, pressure and flow.
通过振动、温升或其他状态信号识别设备运行变化。Use vibration, thermal rise and other condition signals to identify changes in equipment operation.
针对工艺环境或表面残留，采用适合现场使用的快速检测方式。Use practical rapid-screening methods for process environments or surface residues.
以调试为中心，安装与运维配套Commissioning at the core, supported by installation and maintenance
提交项目需求Submit a project inquiry
围绕设备功能、故障排查与试运行提供调试支持，配合厂家完成约定范围内的现场验收。Support functional testing, troubleshooting and trial runs, working with the equipment maker toward agreed site acceptance.
了解详情Learn more
按图纸与工作范围组织机械、电气安装，做好现场检查与调试移交，特殊工种另行确认。Organize mechanical and electrical installation to drawings and agreed scope, including checks and handover to commissioning.
了解详情Learn more
支持设备运行、异常处理与日常维护，结合班次和周期安排人员，并衔接培训与交接。Support equipment operation, issue resolution and routine maintenance, with staffing, training and handover matched to shifts and duration.
了解详情Learn more工作范围、人员配置与进场准备，衔接设备厂家和使用现场。Scope, team configuration and mobilization readiness, coordinated with the equipment maker and the site.
进度跟踪、技术协调与问题闭环，让现场工作有序推进。Schedule tracking, technical coordination and issue closure to keep on-site work on track.
按约定条件核对功能与完成情况，提供检查和验证记录。Review functions and completion against agreed criteria, with inspection and verification records.
交付记录、待办清单与操作培训，衔接后续运行和维护。Work records, open-item lists and operator training connect delivery with ongoing operation and maintenance.
本地团队与工程协作，支持设备安装、调试和驻厂服务，衔接厂家与现场的沟通。Local teams and engineering collaboration support installation, commissioning and on-site service, connecting the manufacturer with the site.
当地协调与合作工程团队，按设备、地点和工期配置现场支持，明确技术接口与交付范围。Local coordination and partner engineering teams provide support matched to the equipment, location, schedule and agreed scope.
告诉我们你的应用条件、部件需求或现场任务， 一起找到合适的解决办法。Tell us about your application or on-site challenge. Let’s find the right way forward.
按应用行业、技术方向或设备部署阶段，查找相关应用与工程案例。Find relevant applications and engineering cases by industry, technology area or equipment deployment stage.
按应用行业、技术方向或设备部署阶段，查找相关应用与工程案例。Find relevant applications and engineering cases by industry, technology area or equipment deployment stage.
按应用行业、技术方向或设备部署阶段，查找相关应用与工程案例。Find relevant applications and engineering cases by industry, technology area or equipment deployment stage.
从团队积累，到技术应用与全球交付From team experience to technical applications and global delivery
2012年，团队成员开始服务钢铁、造纸、食品和医药等行业客户，提供工业喷嘴、传感器等产品与应用支持。这段面向生产现场的经验，成为后来拓思业务发展的基础。In 2012, members of our team began serving steel, paper, food and pharmaceutical customers with industrial nozzles, sensors and application support. That experience on production sites laid the groundwork for Teconce’s later development.
2022年，拓思正式成立，从工业自动化产品贸易与品牌渠道业务起步，为制造业客户提供选型、采购和供货支持。产品覆盖传感、测量与控制，以及驱动和执行部件，将团队积累的现场经验延伸为公司的技术服务。Teconce was established in 2022, starting with industrial automation products, brand channels, selection and supply. The portfolio covered sensing, measurement and control, as well as drive and motion components, bringing the team’s field experience into the company’s services.
进入越南市场，拓展自动化产品渠道，为外资制造企业和本地客户提供工业、物流与过程自动化相关产品。国内同步开展面向半导体、电子、汽车和食品行业的应用开发，从供应部件进一步走向解决具体问题。We entered Vietnam, expanding automation channels for foreign-invested manufacturers and local customers across industrial, logistics and process automation. In China, we developed applications for semiconductor, electronics, automotive and food customers, extending our work from supplying parts to solving specific problems.
与半导体设备企业围绕光学检测、真空高温部件和离子束诊断开展应用开发。从工况和结构限制出发，结合材料、光路和检测要求进行适配与验证，逐步积累特殊环境下的技术应用经验。We worked with semiconductor equipment makers on optical sensing, vacuum and high-temperature components, and ion-beam diagnostics. Operating conditions and structural limits guided material choices, optical layouts and validation, building experience in demanding equipment environments.
越南公司成立，进一步连接当地客户、供应链和工程资源。同年开始为中国设备企业的海外项目提供安装、调试、售后与运维支持，把产品和技术服务延伸到设备部署、现场配合与交付。Our Vietnam entity was established, bringing local customers, supply chains and engineering resources closer together. In the same year, we began installation, commissioning, after-sales and maintenance support for Chinese equipment makers overseas, extending our work into site coordination and delivery.
在印度班加罗尔设立办公室，衔接工业产品供货与本地工程支持。围绕传感测量、控制与驱动执行，以及海外设备调试持续深耕；将对工况的理解和可执行的方案结合起来，帮助客户改善效率、良率和交付。We established an office in Bangalore, connecting industrial product supply with local engineering support. We continue to develop sensing, measurement, control, drive and overseas commissioning capabilities, linking application knowledge with practical execution to help improve efficiency, yield and delivery.
从产品选型到应用验证，从国内技术沟通到海外现场交付，拓思始终围绕客户的生产问题开展工作。我们把对设备与工况的理解、合适的技术产品和本地工程能力连接起来，帮助客户改善效率与良率，让技术真正解决现场问题。From product selection and application validation to overseas delivery, Teconce works on the production challenges our customers face. We connect an understanding of equipment and operating conditions with suitable technology and local engineering support, helping customers improve efficiency and yield—and put technology to work on site.
告诉我们你的应用条件、部件需求或现场任务， 一起找到合适的解决办法。Tell us about your application or on-site challenge. Let’s find the right way forward.
面向技术应用、设备调试与本地交付，寻找能与客户一起解决现场问题的伙伴。Join our work in technical applications, commissioning and local delivery, solving practical challenges with customers.
技术产品与应用Technology & applications
将设备工况转化为选型、测试和验证任务。Translate equipment requirements into selection, testing and validation work.
调试与现场服务Commissioning & field service
支持设备启动、功能调试、试运行与现场问题闭环。Support equipment startup, functional commissioning, trial runs and issue resolution.
本地交付与协调Local delivery & coordination
衔接设备厂家、现场团队与客户，跟进进度、问题与交接。Connect equipment makers, site teams and customers across progress, issues and handover.
目前没有开放职位。There are no open positions at present.
本声明适用于拓思网站及其业务咨询、人才意向功能。网站使用名称为 Teconce Automation Technologies；中国业务主体为成都拓思自动化技术有限公司。越南项目涉及的实体为 TECONCE VIET NAM INDUSTRY COMPANY LIMITED；具体合同相对方以书面文件为准。This notice covers the Teconce website, business enquiries and expressions of career interest. The website uses the name Teconce Automation Technologies. Its Chinese business entity is 成都拓思自动化技术有限公司. The Vietnam entity is TECONCE VIET NAM INDUSTRY COMPANY LIMITED; the contracting party for a project is identified in its written documents.
可通过 sarahlin@teconce.com.cn 就本声明或信息处理问题联系我们。联系地址：中国四川省成都市锦江区红星路成都 IFS 1号楼25层。该联系渠道来自公司介绍，正式发布前需确认由谁负责隐私请求。For questions about this notice or information handling, contact sarahlin@teconce.com.cn, Floor 25, Building 1, Chengdu IFS, Hongxing Road, Jinjiang District, Chengdu, China. This channel is taken from the company profile; its assignment for privacy requests must be confirmed before publication.
业务咨询表单包含公司、联系人、邮箱、电话和需求简述；工况、型号、数量、项目安排及附件为补充信息。人才意向功能包含姓名、联系方式、专业背景及自愿选择的简历。请勿提供身份证、银行账户、健康信息或未经授权的第三方资料。Business enquiry fields cover company, contact name, email, phone and a brief. Conditions, models, quantities, project arrangements and attachments are supplementary. Career-interest fields cover name, contact information, professional background and an optional CV. Do not provide identity documents, bank details, health data or unauthorized third-party information.
本网站目前仅在当前浏览器会话中生成草稿，不把表单或所选文件上传至拓思服务器。下载的草稿保存在你的设备中。浏览器的自动填充、历史记录或文件缓存由你所使用的浏览器管理。This website currently generates drafts in the current browser session only. It does not upload forms or selected files to a Teconce server. Downloaded drafts remain on your device. Browser autofill, history and file caches are managed by your browser.
你主动通过邮件等方式发送信息后，拟用于回复咨询、理解应用、评估项目、安排业务沟通或评估合作意向。处理须具有适用法律认可的依据；需要同意的用途应另行明确征求，不将可选营销同意与询盘捆绑。Information that you choose to send by email or another channel is intended for replying, understanding applications, evaluating projects, arranging business discussions or considering professional collaboration. Processing must have an applicable lawful basis. Purposes requiring consent must be presented separately; optional marketing consent is not bundled with an enquiry.
网站草稿不进行信用评分、招聘自动淘汰或其他对个人有重大影响的自动化决策。The website prototype does not perform credit scoring, automated rejection of candidates or other automated decisions with significant effects on individuals.
正式业务协作只应向需要参与该项目的人员和服务方提供必要信息。涉及越南、印度或其他境外接收方时，应先明确接收方、目的、信息类别和保护安排，并完成适用的告知、同意或其他程序。仅浏览本页不构成向所有合作伙伴共享数据的授权。Business coordination should share only necessary information with people and providers involved in the project. Before information is sent to Vietnam, India or another overseas recipient, identify the recipient, purpose, data categories and safeguards, and complete applicable notices, consent or other procedures. Browsing this page does not authorize sharing with all partners.
本版本未接入客户管理、在线招聘或分析平台。缺少本地字体时可能请求 Google Fonts；该服务可能获得 IP 地址和请求信息。第三方网站在你点击外部链接后适用其自己的隐私规则。This version has no connected CRM, recruitment platform or analytics service. If local fonts are unavailable, it may request Google Fonts, whose service may receive IP and request information. External sites apply their own privacy rules when you follow their links.
需求表单中填写的信息不会上传至拓思服务器。你自行发送的业务资料，其保存期限应按项目需要、合同记录、争议处理和适用法定义务确定；目的完成且无继续保存依据时，应删除或匿名化。正式收件功能启用前需明确期限和接收权限。Information entered in the enquiry form is not uploaded to a Teconce server. Retention for material you send separately should depend on project needs, contractual records, disputes and applicable legal duties. Information should be deleted or anonymized when no longer required. Retention periods and access permissions must be defined before online submission is enabled.
任何网络传输都不应被视为绝对安全。涉及客户图纸、工艺参数、源程序等保密资料，请先确认授权和传输方式；必要时先签署保密协议。No network transmission should be treated as absolutely secure. Before sharing confidential drawings, process parameters or source code, confirm authorization and the transfer method, and use a confidentiality agreement where needed.
你可询问信息处理情况，并依适用法律提出查阅、复制、更正、删除、限制处理、撤回同意或其他请求；适用时也可提出可携带或反对处理的请求。我们应在适用期限内回应，合理核实身份，并说明不能执行的原因。你仍可向有管辖权的个人信息保护主管机关投诉。Subject to applicable law, you may ask about processing and request access, copies, correction, deletion, restriction, withdrawal of consent, or other remedies. Portability and objection rights may also apply. Requests should receive a response within applicable deadlines, with proportionate identity checks and reasons for any refusal. You may also complain to the competent data-protection authority.
网站面向工业业务与职业合作，不面向儿童。若发现提交内容涉及未成年人或不必要的敏感信息，请通过上述渠道联系。声明更新会注明版本日期；目的或方式发生实质变化时，需重新履行相关告知程序。This website is intended for industrial business and professional collaboration, not children. Please contact us if submitted material includes a child’s information or unnecessary sensitive data. Notice updates will carry a version date; material changes to purposes or methods require appropriate renewed disclosure.
参考以下公开资料整理信息披露结构；不表示所有法律均适用于本网站，也不替代正式上线前的法律及技术核验。These references informed the disclosure structure. They do not establish that every jurisdiction applies, or replace legal and technical checks before publication.
中国人大网 · 中华人民共和国个人信息保护法ICO · Privacy informationICO · Storage, access technologies and consent参考以下公开资料整理信息披露结构；不表示所有法律均适用于本网站，也不替代正式上线前的法律及技术核验。These references informed the disclosure structure. They do not establish that every jurisdiction applies, or replace legal and technical checks before publication.
中国人大网 · 中华人民共和国个人信息保护法ICO · Privacy informationICO · Storage, access technologies and consent本网站用于展示拓思的技术产品、全球工程服务和应用信息，以及开展初步业务沟通。浏览网页、生成草稿或下载资料不构成订单、报价接受或服务合同。This website presents Teconce’s technical products, overseas engineering services and application information, and supports initial business discussions. Browsing, generating a draft or downloading a file does not create an order, accepted quotation or service contract.
产品适用性取决于型号、材料、设备接口、工况、验证条件及安装方法。图片与原理图不能替代批准图纸、操作规程或安全评估。交付范围、技术指标、验收条件、质保和责任以双方正式书面约定为准。Product suitability depends on model, material, interfaces, conditions, validation and installation. Images and principle diagrams do not replace approved drawings, procedures or safety assessments. Scope, performance, acceptance, warranties and responsibilities are governed by formal written agreement.
网页费率仅在标明条件下用于预算参考；项目报价需确认地区、工种、等级、工时、差旅、税费与有效期。不应将网页示例当作固定承诺或把某项目结果推广到所有工况。Published reference rates apply only under their stated assumptions. Project pricing requires confirmation of location, role, level, hours, travel, tax treatment and validity. Examples are not fixed commitments, and results from one project do not automatically apply to other conditions.
网站标识、文字、图形及有权发布的资料受相关权利保护。可在注明出处的前提下用于内部业务评估；未经授权不得再销售、去除权利标识、冒用身份或声称获得品牌背书。第三方商标归各自权利人所有，出现品牌名本身不表示当前授权代理关系。Website marks, text, graphics and authorized documents are protected by applicable rights. They may be used for internal business evaluation with attribution; unauthorized resale, removal of rights notices, impersonation or claimed endorsement is not permitted. Third-party trademarks belong to their owners; mention of a brand does not itself establish a current authorized-distributor relationship.
请提供真实、与业务相关且有权披露的信息，不上传恶意程序、违法内容、他人隐私或未经许可的客户资料；不要干扰网站、绕过访问限制或探测未授权接口。对敏感项目先约定保密与交付方式。Provide accurate, relevant information you are authorized to share. Do not submit malware, unlawful content, others’ private information or unauthorized customer material, interfere with the site, bypass controls or probe unauthorized interfaces. Agree confidentiality and transfer arrangements first for sensitive projects.
外部链接与下载由相应提供方管理。网站可为维护或更正而调整，拓思不保证所有页面永久可用。任何责任限制均不能排除适用法律不允许排除的义务、欺诈或其他依法不能免责的责任；本页也不替代已签合同。External destinations and files are managed by their respective providers. Content may change for maintenance or correction, and continuous availability is not guaranteed. Nothing here excludes mandatory legal obligations, fraud or liability that cannot lawfully be excluded, or replaces a signed contract.
对网站资料有疑问或发现错误，可通过公司业务联系方式反馈。争议与适用法律按具体合同和强制性法律处理，不以本页替代项目中的司法管辖或仲裁约定。Questions and errors can be reported through company business contacts. Applicable law and disputes follow the relevant contract and mandatory law; this page does not replace agreed jurisdiction or arbitration provisions.
拓思以真实的产品信息、服务范围与项目记录开展沟通。不以未完成的项目冒充已交付案例，不把合作伙伴经验说成自身独立业绩，不以资源覆盖替代自有分支或认证声明。客户名称、图片和案例公开应获得相应授权。Business discussions should use accurate product information, service scope and project records. Unfinished projects must not be described as delivered cases, partner experience as independently delivered work, or resource coverage as owned branches or certifications. Customer names, images and published cases require appropriate authorization.
涉及跨境供货、技术资料或软件时，应按产品属性、起运地、目的地、最终用户及最终用途完成适用的审查。需要许可、清关或其他程序的，应完成后再交付；不通过虚假申报、第三方转运或更换名称规避限制。网页资料不能替代单项交易的合规判断。Cross-border goods, technical information and software require review against product characteristics, origin, destination, end user and end use. Required permits, customs procedures and other steps must precede delivery. False declarations, third-party routing or renaming must not be used to evade restrictions. Website information does not replace transaction-specific compliance review.
不以贿赂、回扣、不当利益或虚假文件获取业务。合作中的利益冲突、价格与采购安排应如实披露并通过正式渠道确认。供应商、合作工程团队与客户应遵守各自适用的商业和劳动规则。Business must not be obtained through bribery, kickbacks, improper benefits or false records. Conflicts of interest, pricing and procurement arrangements should be disclosed accurately and confirmed through proper channels. Suppliers, partner engineering teams and customers must observe applicable business and employment rules.
现场任务需明确工作范围、风险、培训、权限与责任。特殊工种、设备操作和受控区域以所需资格及客户批准为前提。技术示意图与案例描述不是现场安全操作指令，不应据此跳过隔离、许可或风险评估。Site work requires a defined scope, risks, training, permissions and responsibilities. Specialist trades, equipment operation and controlled-area work require relevant qualifications and customer approval. Technical diagrams and case descriptions are not safety instructions and must not be used to bypass isolation, permits or risk assessment.
客户图纸、工艺、人员和商业资料按约定用途使用，向合作方提供前应确认必要性与授权。发现疑似侵权、信息泄露、不当行为或页面错误，请通过 sarahlin@teconce.com.cn 联系，说明事实并避免发送超出必要范围的敏感材料。Use customer drawings, process, personnel and commercial information for agreed purposes; confirm necessity and authorization before sharing with partners. Report suspected infringement, disclosure, misconduct or site errors to sarahlin@teconce.com.cn with factual details and no unnecessary sensitive material.
本页说明行为原则，不是 ISO、监管许可或第三方合规认证的证明。This page describes conduct principles, not evidence of ISO certification, regulatory approval or third-party compliance certification.
Explore glass reflectors against vacuum, temperature, cleaning media and optical installation conditions.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
How can retroreflective detection balance material compatibility and signal stability in vacuum, heat and cleaning environments?
Read morePlanned content: reflector location, detection target and outgoing / returning optical paths. Material selection and validation will be populated from verified source documents.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
Explore robot contact pads against dimensions, materials, particles and service-life requirements.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
Wafer-handling contact parts must account for particles, outgassing, wear and surface protection.
Read morePlanned content: the relationship between robot fingers, contact pads and the wafer. Dimensions, materials and test evidence await source verification.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
Explore sensing spots, through-beam optics and sensor arrangements against wafer spacing and installation space.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
Space-constrained wafer detection requires a clear target, optical position and resolution requirement.
Read morePlanned content: wafer slots, emitter / receiver locations and the sensing path. Detailed structure and performance data are pending.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
Review replacement compatibility from the original model, mounting dimensions, sensing distance and interface.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
Replacement parts need to match the original equipment’s mechanical dimensions, electrical interface and detection task.
Read morePlanned content: interface, mounting and specification comparisons. Compatibility conclusions require approved source evidence.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
Explore coordination between the manufacturer and local engineers during startup, functional checks and trial runs.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
An overseas site needs technical coordination between the equipment maker, local engineers and operating team.
Read morePlanned content: commissioning tasks, team responsibilities, escalation and acceptance handover. Specific project records and outcomes await confirmation.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
Explore coordination across mechanical, electrical and piping work, with installation checks and commissioning handover.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
Overseas line installation involves multiple trades and requires a clear scope and commissioning-handover criteria.
Read morePlanned content: equipment layout, installation interfaces and handover checks. Site, scope and results will be verified against source material.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
Explore local response and manufacturer support for operating issues, routine maintenance and operator training.
Case-detail template · Images and project facts pending verification
Reference image · Approved artwork and source pending
Diagram · Structure and optical paths follow the approved design
After startup, the site needs coordinated issue response, maintenance, manufacturer support and operator handover.
Read morePlanned content: issue logs, diagnosis, escalation, closure and training. Customer details, personnel experience and delivery results are pending verification.
Read moreTest conditions, delivery scope and publishable results remain to be verified. No unconfirmed performance claims or project outcomes are used.
Read moreShare site photos, operating conditions or project requirements to discuss relevant technical and engineering support.
真空、高温及清洗环境中的反射式检测，如何兼顾材料兼容性与信号稳定性？
反射器需要放在什么位置、光路是否被遮挡、传感器是否位于腔体之外，这些安装关系比单独列一项材料参数更能说明选型问题。示意图应先标出发射、返回光路与检测对象，再确认可用空间。
拟展示反射器位置、检测目标及发射／返回光路；材料选型与验证信息按原始资料补充。
温度、真空与清洗条件需要分别描述，并说明持续时间和变化过程。以这些条件讨论材料、结构与安装适配，不能把某一种玻璃材料的名称等同于整套检测方案已通过验证。
验证记录应对应实际传感器、安装距离和角度，记录环境变化前后的信号表现，并注明测试条件、样品版本和限制。是否适用，应根据这些记录共同确认。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Explore glass reflectors against vacuum, temperature, cleaning media and optical installation conditions.
How can retroreflective detection balance material compatibility and signal stability in vacuum, heat and cleaning environments?
Selection begins with mounting relationships: the reflector position, possible obstructions and whether the sensor is outside the chamber. A diagram should show outgoing and returning light and the target before available space is assessed.
Planned content: reflector location, detection target and outgoing / returning optical paths. Material selection and validation will be populated from verified source documents.
Describe temperature, vacuum and cleaning conditions separately, including duration and variation. Use those conditions to assess materials, structure and mounting; a material name alone does not validate the complete detection arrangement.
Validation records should identify the actual sensor, optical distance and angle, and signal behaviour before and after environmental changes. Record conditions, sample revision and limitations, and confirm suitability against that evidence.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry晶圆搬运接触部件需要兼顾低颗粒、低析气、耐磨与表面保护。
触垫是机械手与晶圆之间的接触界面。讨论选型时，需要先确认接触点的位置、尺寸、数量及搬运方式，再结合材料与更换周期判断评估重点。
拟展示机械手手指、触垫及晶圆的接触关系；尺寸、材料与测试依据待原始资料确认。
示意图应同时呈现机械手手指、触垫和晶圆，并放大接触区域。候选材料的比较需要对应同一接触结构，避免把不同工况下的寿命描述直接放在一起比较。
样品评估可围绕表面痕迹、颗粒、磨损和接触稳定性整理记录。只有试用条件与结果明确后，才能讨论具体的替换范围和维护周期。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Explore robot contact pads against dimensions, materials, particles and service-life requirements.
Wafer-handling contact parts must account for particles, outgassing, wear and surface protection.
A pad is the contact interface between a robot and the wafer. Selection starts with contact locations, dimensions, quantity and handling method, before material and replacement intervals are considered.
Planned content: the relationship between robot fingers, contact pads and the wafer. Dimensions, materials and test evidence await source verification.
The diagram should show robot fingers, pads and wafer, with a magnified contact area. Compare candidate materials against the same contact structure rather than equating service-life descriptions from different conditions.
Organize sample records around surface marks, particles, wear and contact stability. Specific replacement scope and maintenance intervals should be discussed only after trial conditions and results are clear.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry空间受限的晶圆检测，需要明确检测目标、光路位置及分辨要求。
检测目标可能是槽位有无、边缘位置或异常放置。不同任务对光路和安装空间的要求不同，应先在设备结构上标出实际需要区分的状态。
拟展示晶圆槽位、发射接收位置与有效光路；具体结构和性能参数待确认。
将发射与接收位置、晶圆边缘和可用安装空间放到同一示意图中，再核对检测距离、响应需求和干扰来源。产品参数需要和具体安装方式一起确认。
验证应覆盖正常状态与需要识别的异常状态，记录信号与机械位置的关系。具体分辨能力和适用范围以确认的测试条件为准。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Explore sensing spots, through-beam optics and sensor arrangements against wafer spacing and installation space.
Space-constrained wafer detection requires a clear target, optical position and resolution requirement.
The task may be slot occupancy, edge position or abnormal placement. These tasks place different demands on optics and space; first show the states that must be distinguished in the equipment structure.
Planned content: wafer slots, emitter / receiver locations and the sensing path. Detailed structure and performance data are pending.
Show emitter and receiver, wafer edge and available mounting space in one diagram, then assess range, response needs and interference. Product specifications must be considered together with the mounting arrangement.
Test both normal and relevant abnormal states, recording the relationship between signal and mechanical position. Resolution and usable scope depend on the confirmed test conditions.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry替换部件需要与原设备的机械尺寸、电气接口及检测任务匹配。
相近的外形或同样的检测距离，不代表部件可以直接替换。原型号、尺寸、接口、输出形式和动作逻辑需要逐项对照。
拟展示原件与替换件的接口、安装和参数对照；兼容结论以确认版资料为准。
替换说明应把相同点和差异点分别列出，并注明哪些差异可以通过支架、接线或参数调整处理，哪些需要重新验证。
先确认单件适配与设备动作，再决定批量替换计划。不能把一次测试的结论扩展到尚未覆盖的设备型号和工况。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Review replacement compatibility from the original model, mounting dimensions, sensing distance and interface.
Replacement parts need to match the original equipment’s mechanical dimensions, electrical interface and detection task.
A similar shape or sensing range does not establish interchangeability. Compare the original model, dimensions, interface, output type and switching logic item by item.
Planned content: interface, mounting and specification comparisons. Compatibility conclusions require approved source evidence.
Document similarities and differences separately, showing which differences can be addressed through mounting, wiring or settings, and which need further validation.
Confirm individual fit and equipment behaviour before planning a wider replacement. Do not extend one test conclusion to equipment models or conditions not covered by it.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry海外现场需要衔接设备厂家、当地工程团队与使用现场的技术沟通和调试任务。
海外调试需要让设备厂家、当地现场团队和使用方看到同一份任务与问题清单。沟通应围绕设备状态、待完成功能和需要厂家决策的事项展开。
拟展示调试任务、团队分工、问题升级与验收交接；具体项目记录与成果待确认。
调试工作按授权和约定范围开展，现场排障、程序修改与工艺调整应明确各自责任。对需要厂家支持的异常，应保留可复现的信息与处理记录。
项目结果应通过功能检查、试运行记录、验收清单和交接材料说明。良率、节拍或产能目标只有在明确约定与验证后才能作为交付结果。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Explore coordination between the manufacturer and local engineers during startup, functional checks and trial runs.
An overseas site needs technical coordination between the equipment maker, local engineers and operating team.
Overseas commissioning requires equipment makers, local teams and operators to work from a shared task and issue list, covering equipment status, remaining functions and matters requiring manufacturer decisions.
Planned content: commissioning tasks, team responsibilities, escalation and acceptance handover. Specific project records and outcomes await confirmation.
Commissioning follows agreed scope and authorization. Define responsibility for troubleshooting, software changes and process adjustment. Escalated issues should include reproducible information and a record of actions.
Explain outcomes through functional checks, trial-run records, acceptance lists and handover documents. Yield, cycle-time or capacity targets become delivery outcomes only when explicitly agreed and verified.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry海外产线安装涉及不同工种配合，需要明确安装任务和向调试移交的条件。
安装任务涉及机械、电气与可能的配管界面。开始前应确认图纸版本、场地条件、工具、许可和厂家参与方式。
拟展示设备布局、安装任务界面与移交检查项；项目现场、范围和结果待资料核实。
将设备布局与工种分工放在同一任务图中，有助于识别交叉作业和先后依赖。安装完成的检查项应与后续调试的进入条件对应。
交接应保留完成项、待办问题和责任人，避免把“人员已撤场”当成“安装已经验收”。具体成果以项目检查与验收记录为准。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Explore coordination across mechanical, electrical and piping work, with installation checks and commissioning handover.
Overseas line installation involves multiple trades and requires a clear scope and commissioning-handover criteria.
Installation involves mechanical, electrical and possible piping interfaces. Confirm drawing revisions, site readiness, tools, permits and manufacturer involvement before work starts.
Planned content: equipment layout, installation interfaces and handover checks. Site, scope and results will be verified against source material.
A task diagram combining equipment layout and trade responsibilities helps identify overlaps and dependencies. Installation completion checks should correspond to the entry conditions for commissioning.
Handover should record completed items, open issues and owners. Demobilization is not evidence of acceptance; project inspection and acceptance records determine the outcome.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry设备投产后，需要衔接现场异常处理、维护、厂家支持和操作交接。
驻厂支持的重点是让异常有记录、有响应、有升级路径，而不是无限范围的设备改造。设备类型、班次和服务周期决定所需配置。
拟展示异常记录、排查、升级、闭环与培训安排；客户名称、团队履历及交付结果待确认。
日常维护、现场排障、厂家支持和操作培训需要区分责任边界。示意图可用一条闭环说明异常如何从发现走向处理、验证和交接。
服务记录可围绕异常类别、处理过程、恢复情况和重复问题整理。设备运行表现需要结合生产条件解读，不应直接将改善全部归因于驻厂服务。
目前为技术说明初稿，尚未填入确认的测试数据、客户名称或项目成果。正式发布前，将在这里补充条件、过程、结果及限制。
Explore local response and manufacturer support for operating issues, routine maintenance and operator training.
After startup, the site needs coordinated issue response, maintenance, manufacturer support and operator handover.
Resident support centres on logged issues, response and escalation, not unlimited equipment redesign. Equipment, shifts and service duration determine the required staffing.
Planned content: issue logs, diagnosis, escalation, closure and training. Customer details, personnel experience and delivery results are pending verification.
Distinguish routine maintenance, local troubleshooting, manufacturer support and operator training. A closed-loop diagram can show how an issue moves from discovery to resolution, verification and handover.
Organize service records by issue category, actions, restoration and recurring problems. Interpret operating performance alongside production conditions rather than attributing all improvement to resident support.
This is a technical-note draft without approved test data, customer names or project outcomes. Conditions, procedure, results and limitations will be added before publication.
Share equipment structure, operating conditions or project scope to make the discussion specific.
Submit a related enquiry办公与现场支持
TECONCE AUTOMATION TECHNOLOGIES
中国四川省成都市锦江区红星路成都 IFS 1号楼25层
sarahlin@teconce.com.cn
195 2214 2669
本地工程支持
TECONCE VIET NAM INDUSTRY COMPANY LIMITED
27 Pham Quy Thich, Tan Quy Ward, Tan Phu District, Ho Chi Minh City, Vietnam
Barbara@teconce.com.cn
+84 903868292
本地工程支持
No.42, Rajeswari Nagar, Laggere, Peenya Industrial Area, Bangalore, Karnataka 560058, India
sarahlin@teconce.com.cn
+91 9916028717
合作伙伴
合作伙伴
Alte Oper, Bockenheimer Landstrasse 17–19, 60325 Frankfurt am Main, Germany
合作伙伴
合作伙伴
US Bank Tower, 633 West Fifth Street, 26th and 28th Floor, Los Angeles, CA 90071, USA
Office & on-site support
TECONCE AUTOMATION TECHNOLOGIES
Floor 25, Building 1, Chengdu IFS, Hongxing Road, Jinjiang District, Chengdu, China
sarahlin@teconce.com.cn
195 2214 2669
Local engineering support
TECONCE VIET NAM INDUSTRY COMPANY LIMITED
27 Pham Quy Thich, Tan Quy Ward, Tan Phu District, Ho Chi Minh City, Vietnam
Barbara@teconce.com.cn
+84 903868292
Local engineering support
No.42, Rajeswari Nagar, Laggere, Peenya Industrial Area, Bangalore, Karnataka 560058, India
sarahlin@teconce.com.cn
+91 9916028717
Partner network
Partner
Alte Oper, Bockenheimer Landstrasse 17–19, 60325 Frankfurt am Main, Germany
Partner network
Partner
US Bank Tower, 633 West Fifth Street, 26th and 28th Floor, Los Angeles, CA 90071, USA
| 服务 | 岗位 | 交付边界 |
|---|---|---|
| 设备安装 | 机械 / 电气安装 | 完成安装与检查，达到调试移交条件；程序和工艺调试另行确认。 |
| 设备调试 | 综合 / 控制 / 专项调试 | 按约定范围完成功能、试运行及现场验收；质量、节拍等指标须明确约定。 |
| 驻厂售后与运维 | 现场服务 / 维护 | 点检、故障响应、升级闭环与维护；不等同于无限范围的设备改造。 |
| 等级 | 定位 | 能力说明 |
|---|---|---|
| L0 | 辅助 | 工具、记录、搬运及现场辅助。 |
| L1 | 执行 | 按图纸、步骤或作业指导执行标准任务。 |
| L2 | 独立作业 | 独立完成本岗位常规工作与自检。 |
| L3 | 高级 / 排障 | 处理复杂任务、异常排查并指导团队。 |
| L4 | 负责交付 | 负责团队或项目的计划、质量与交付。 |
依据《本地工程服务与工程师分级标准》V1.0对外版整理的网页摘要。语言、证书与项目经验另行评估；具体范围、配置与验收以项目约定为准。
正式文件待接入。
| Service | Roles | Delivery scope |
|---|---|---|
| Installation | Mechanical / electrical installation | Complete installation and checks for commissioning handover; software and process tuning are separately agreed. |
| Commissioning | General / controls / specialist commissioning | Complete functionality, trial runs and site acceptance within agreed scope; quality and cycle-time targets require explicit agreement. |
| On-site support & maintenance | Field service / maintenance | Inspection, fault response, escalation, closure and maintenance; not unrestricted equipment redesign. |
| Level | Role level | Capability |
|---|---|---|
| L0 | Helper | Tools, records, handling and site assistance. |
| L1 | Junior | Execute standard tasks to drawings, steps or work instructions. |
| L2 | Independent | Complete routine role-specific work and self-checks independently. |
| L3 | Senior / troubleshooting | Handle complex tasks, troubleshoot and guide the team. |
| L4 | Lead / delivery | Lead team or project planning, quality and delivery. |
Web summary of the external Local Engineering Services and Engineer Competency Levels V1.0. Language, certifications and project experience are assessed separately. Scope, staffing and acceptance follow the project agreement.
The approved document has not been added yet.
| 服务 / 岗位 | 等级 | 人日参考费率 |
|---|---|---|
| 机械安装 | L0–L4 | 待接入确认版 |
| 电气安装 | L0–L4 | 待接入确认版 |
| 设备调试 | L0–L4 | 待接入确认版 |
| 驻厂服务 / 维护 | L0–L4 | 待接入确认版 |
参考费率用于预算与资源规划，不是项目报价。地区、工种、等级、工时、累计人日及差旅等条件需一并确认。
正式文件待接入。
| Service / role | Level | Reference day rate |
|---|---|---|
| Mechanical installation | L0–L4 | Pending approved version |
| Electrical installation | L0–L4 | Pending approved version |
| Equipment commissioning | L0–L4 | Pending approved version |
| On-site service / maintenance | L0–L4 | Pending approved version |
Reference rates support budgeting and resource planning, not a project quotation. Confirm region, role, level, hours, total person-days and travel conditions together.
The approved document has not been added yet.
发布日期 2026-09-03 · 有效至 2026-11-03
将设备工况转化为可验证的选型与应用方案。
请提供相关项目、承担的工作、熟悉的产品 / 软件和可出差范围。无需提交客户机密或未经授权的图纸。
岗位内容供发布确认；兼容预览显示有效期，实时开放状态需确认。
Published 2026-09-03 · Valid through 2026-11-03
Translate equipment requirements into practical, testable application solutions.
Please include relevant projects, responsibilities, familiar products or software, and travel availability. Do not submit client secrets or unauthorized drawings.
Posting content is for publication review. This preview displays dates; current availability requires confirmation.
发布日期 2026-09-11 · 有效至 2026-11-11
支持设备启动、功能调试、试运行和现场问题闭环。
请在简历中注明设备类型、安装 / 调试 / 运维经历、可到岗时间和可服务国家。请勿提交客户保密信息。
岗位内容供发布确认；兼容预览显示有效期，实时开放状态需确认。
Published 2026-09-11 · Valid through 2026-11-11
Support equipment startup, functional commissioning, trial runs and issue resolution.
Include equipment types, installation / commissioning / maintenance experience, availability and countries served. Please do not disclose client confidential information.
Posting content is for publication review. This preview displays dates; current availability requires confirmation.
发布日期 2026-09-18 · 有效至 2026-11-18
连接设备厂家、现场团队与客户，跟进进度、问题和交接。
请注明所在地、可到岗日期、项目协调 / FSE经历、语言能力，以及全职或兼职安排。
岗位内容供发布确认；兼容预览显示有效期，实时开放状态需确认。
Published 2026-09-18 · Valid through 2026-11-18
Connect equipment makers, site teams and customers across progress, issues and handover.
State your location, availability, coordination / FSE experience, languages, and full-time or part-time availability.
Posting content is for publication review. This preview displays dates; current availability requires confirmation.
当前文件预览未运行交互脚本。以下展示必需信息；生成草稿、附件预览等功能需要允许脚本的浏览器。本页不会上传或发送。The file preview has not started interactive scripts. Required information is shown below; draft generation and attachment previews need a script-enabled browser. Nothing is uploaded or sent.
Preview only. Nothing is submitted or uploaded. Open in a browser with scripts enabled to generate an application draft.
Back to positions
